Harness Wrap $3.00 per roll

OEM non-stick used on factory harnesses.
Will not leave a sticky mess like electrical tape over time.
1″ X 100ft

300°F Nylon Split Loom:

1/4" wire loom - $0.25/ft

3/8" wire loom - $0.50/ft

1/2" wire loom - $0.75/ft

7/8" wire loom - $1.00/ft

Aditional shipping charges may apply to wire loom.

3″ X 1-1/2″ Oval Grommet $10.00 (perfect for Ford ECM connectors and 7/8″ loom)

Round Grommet 2-1/2″OD - 1-1/4″ID $5.00 (perfect for 7/8″ loom)

Round Grommet 1-1/2″OD - 3/4″ID $2.50 (perfect for 1/2″ loom)

Round Grommet 1-1/4″OD - 1/2″ID $1.00 (perfect for 3/8″ loom)

Electrical Distribution Stud Red $10.00

Electrical Distribution Stud Black $10.00

3/8″ stud X 1″ tall w/ Stainless Nylon Lock Nut

Mega-Fuse Holder $12.00 each

100A Mega-Fuse $6.00 each

125A Mega-Fuse $6.00 each

150A Mega-Fuse $6.00 each

175A Mega-Fuse $6.00 each

200A Mega-Fuse $6.00 each

225A Mega-Fuse $6.00 each

250A Mega-Fuse $6.00 each

Fuse Block w/ terminals $7.00 each

Relay Block w/ terminals $4.00 each

Can interlock as many as necessary

16ga Relay Terminal $0.25 each

12ga Relay Terminal $0.35 each

Heavy-Duty 5-Prong Relay (rated over 30amps) $6.00

75 Amp Relay $25.00

Adhesive Lined Heat Shrink:
* 3:1 shrink ratio
* Internal meltable sealant
* Flame retardant
* Protects against flexing and abrasion

1/8″ heat shrink - $1.00/ft

3/16″ heat shrink - $1.25/ft

1/4″ heat shrink - $1.50/ft

3/8″ heat shrink - $1.75/ft

IDM Resistor $1.00

22K ohm 1/2watt resistor
Used for the TFI ignition circuit

Charge Light Resistor $1.00

510K ohm 1watt resistor
Used with the optional Alternator Charge Light circuit

Actuator Eliminator Resistors $2.00 each

75 ohm 3watt Resistor
Used to keep the check engine light OFF when removing EVR, CANP, TAB & TAD solenoids.